Complete Guide to Luggage Walked Wear Test Machine Mar 23, 2023

Complete Guide to Luggage Walked Wear Test Machine



Table of Contents


Section 1: What tests are required for luggage during movement?
Section 2: How to conduct Luggage Walked Wear Test?
2.1. Installation samples
2.2. Adjust angle
2.3. Reinforcement
2.4. Select mode
2.5. Parameter setting
2.6. Start to test
2.7. Complete test

Section 3: Why GESTER GT-LC01 Mileage Tester is more advantageous ?



Section 1: What tests are required for luggage during movement?


The suitcase will wear and tear when moving, and the merchant needs to do relevant tests after producing the suitcase. GESTER Luggage Walked Wear Test Machine simulating the situation when luggage moves and keep it in continuous testing, is to test the quality of wheels, axle, wheel frame, tie rod and luggage, calculate and evaluate the wear value of wheels. Put moderate weights in the testing sample. When the conveyor belt travels, the friction plate and the sample wheel will collide and rub with each other, and the sample is subjected to shock oscillation and wear.


luggage abrasion tester


Section 2: How to conduct Luggage Walked Wear Test?

The luggage abrasion test angle is generally 45° according to the standard.


Luggage Walking Bump Abrasion Tester


2.1. Installation samples

  • Install the tie rods of the loaded bags onto the U-shaped buckles.lt can be hard-installed or soft-installed. For soft-installation, anauxiliary canvas block with 4 holes is required to be hung.


Luggage Competitive Mileage Tester


2.2. Adjust angle

  • By adjusting the height of the U-shaped buckle up and down by thehandwheel. the angle of the bag on the sports belt can be adjusted.

2.3. Reinforcement
  • Loosen the fixing screws on both ends of the Luggage Walking Bump Abrasion Tester blocking bar, and adjust the distance between the blocking bar and the luggage.Then, tighten the screw.

2.4. Select mode
  • Turn on the luggage Mileage Testing machine power and the emergency stop switch. Select the Luggage Competitive Mileage test mode (times mode, mileage mode, timing mode), we take the mileage mode as demo.


luggage Mileage Testing machine


2.5. Parameter setting

  • Set the running total mileage, running speed, interval mileage,and interval mileage dwell time according to the standard.Clear current mileage and time.

2.6. Start to test
  • After the Suitcase Walk Mileage Abrasion Test Machine runs to the preset interval mileage, Luggage Mileage Road Test Machine will automatically pause forthe set dwell time,and then continue to run until the total mileage has been run.

2.7. Complete test
  • when the set total mileage is reached or the bag is damagedand parts are dropped, the Luggage mileage life testing machine will automatically stop. After the Luggage simulate transport mileage life test done, check the wear situation of wheeland whether the luggage is damaged or deformed.

Section 3: Why GESTER GT-LC01 Mileage Tester is more advantageous ?


GESTER develops the control system of luggage mileage test machine by ourselves, which has setting and counting functions.There are start, stop, pause, count and clear functions on the test control panel. luggage abrasion tester can count from 0 to 999,999 times. The Luggage Walking Bump Abrasion Tester will automatically stop when the times reaches the setting number or the wheel of luggage is broken. The Controlling System controls motor to drive the belt to rotational motion, the luggage will rise and fall when wheels reach the block A/B, and that will simulate the situation of different roads and is the important basis to evaluate the quality of luggage.


Luggage Walked Wear Test Machine

Servicio en línea

+86-595-28886108